Baby Costumes

So I'm making my girls their costumes this year because most costumes are so outrageous in price and are so cheaply made. Plus when I was a girl my mom made all my costumes and I loved it, So it's definitely a tradition I'm looking forward to carrying on with my girls. I chose to do an Indian and Cowgirl this year because my husband and his sister have a childhood photo of them as an Indian and Cowgirl for Halloween when they were young and I thought it'd be cute to replicate their costumes. So far I have gotten the dress done for the Indian costume with my older daughter will be wearing. It was very easy to make and I spent under $10 for my materials. Mind you I had a few things before making the costume such as a sewing machine, thread, hot glue gun, hot glue sticks, and ribbon which could make your project more expensive if you don't already own them.

For this project I purchased:

1. Brown fleece- which only cost $2.47 a yard from wal-mart. I chose to go with this material since it tends to be a bit colder during Halloween.
2. Felt- which cost 23 cents a piece. I used brown and red for the detail on the neck line. Which with the felt all I used to apply the pieces together and onto the dress was hot glue.
3. Fringe- I got the fringe from wal-mart for $2.50 and i sewed that part onto the dress to make sure it was secure.
4. Ribbon- I used black and turquoise ribbon for the design around the neckline and along the fringe on the bottom of the dress to give it a little more detail.

Steps to making the dress:

1. Step one, I used a dress that fits my daughter as a reference to cut out the material. I cut out the front and back shapes. Dipping in a little bit on the front piece so the neck line wouldn't be to tight. When you're cutting out the shapes along your dress reference don't worry about cutting them directly up against the dress. It's probably better if you leave an extra inch all the way around your pattern because you will lose some of it sewing your dress together.
2. Step two, I sewed the zipper into the back pattern of the dress. I cut a slit directly down the middle of the back the length of the zipper. Then I pinned the zipper with the material folded in a bit so there wont be an ugly seam hanging around the zipper. Once my zipper was pinned I sewed it down. Most of you probably already know this but if you're new to sewing make sure at the beginning and end don't forget to back stitch so your seams do not come undone.
3. Step three, I sewed my exposed edges of the dress. This would be the bottom of the front and back pattern, the neckline and the arm holes. Don't worry about the tops of the sleeves or sides of the dress yet cause that will be taken care of when you sew the patterns together. 
4. Step four, My dress has a zig zag pattern sewed into the front and back just for a little extra design. It's very hard to see it in these pictures but if you choose to do that design now is the time for that. All I did was freehand zig zags across the whole front and back patterns along the bottom.
5. Step five, I made my design for the neck line. I cut out the shape I wanted on my neckline with the brown felt and then I used ribbon and hot glued my first design down. Then I cut out triangles also felt and glued those in between my ribbon. 
6. Step six, I hot glued all my pieces that were being attached to the dress. First I did the neckline. My pattern was already made so all I had to do was glue it down along the neck line. I left the bottom of the pattern open to glue down last because I was tucking fringe underneath the bottom. So this is when the fringe goes in and I hot glued this piece of fringe since it was going to be covered with the pattern anyway. Once my fringe was in place I glued down the rest of the pattern and then I used a piece of black ribbon to hide the seams and glued that over the top. After this was done I glued my turquoise ribbon to the bottom of the dress right above the fringe. 
7. Step seven, Sew the front and back pieces together! Place your pieces right side in and pin the dress down the sides about a 1/4 inch in sew down the sides making sure to back stitch at the top and bottom so your dress doesn't come apart. After the sides you will do the same thing with the straps at the top.   
8. Step eight, Lastly after the dress was all done I used orange puffy paint and added the dots on the neckline pattern. Make sure to do this step last so the dress can sit and dry for a good couple of hours.

This dress was very easy and fun to make. I'm in no way a great sewer. I teach myself mostly everything I know or have picked it up from watching my mom when I was a kid. If you can work a sewing machine and know how to use a hot glue gun you can make this dress.

I still have a headband and bow and arrow to make as well. I will be posting more pictures in a couple days when I have everything together and actually on my little girl so you can get an idea of what it looks like.

 

Catch Up!

So I'm finally playing catch up. This last week I've been busy with my kids and redoing my blog I haven't had much time for posts. But a little later today I will be posting latest projects and ideas. I went and go a notebook the other day so all my projects could be a little more organized since I'm always losing the loose sheets of paper I jot them down on! It's helping me prioritize the order of things I want to get done first because I have a terrible habit of doing 100 projects at the same time. This last week I started on my girls costumes for Halloween. My oldest is going to be an Indian and the youngest a cowgirl. So far I got the dress done for the Indian costume done and will be posting pictures of it later so keep your eyes posted.

A new adventure

Starting a new journey!

Alright so I recently got a new camera (Canon EOS 40D)! I got the camera mainly to shoot photos of my daughters and tattoos that my husband and myself do! This is my first Digital SLR, so I've been reading up on tips and tricks, bought a basic lens that I can already tell I will grow out of quickly but as with anything else I did not want to jump in head first into something I do not know, I'd rather learn the proper way. I LOVE the camera and am very excited to get started with my photography adventures. As I get better and obtain more knowledge I plan to eventually pursue shooting weddings and children. I absolutely love the two subjects for photography. Especially being that I make things for weddings and for children as well. So that being said here are a few photos I went out and took today. 

And an update on the daily DIY craft!

My niece turned 3 this week and she has just about every toy known already so I wanted to do something different. I decided to make her a hair accessory holder/ hair accessories. This DIY project was extremely inexpensive and simple to make.
Materials used:

1. Oatmeal Can- I used a basic Acrylic paint and painted the outside, I did about 3 coats to make sure all logos were no longer visible.
2. Candlestick Holder- I found a clear candlestick holder at the Dollar Tree
3. Glue- I went with Epoxy because I wanted to make sure it was sturdy.
4. Paint/Brush- Acrylic Paint and an old brush
5. Elastic- Two Elastic Strips ran down the sides, used to clip all the hair clips on to.
6. Hair Accessories- You can choose to make them or buy them.

Here's the final Product, and I chose to make my hair accessories.

I used my girls as models for some of the accessories.

Unfinished Business

A little behind with my blog, sorry.

The trip to Arizona went great. Got to do some fun tattoos, spend personal time with my family, see old friends, and ordered myself a new lens, and the hubby a bishop rotary. I'm very anxious to get my camera up and running and start messing around with it, as well as be able to take much nicer photos of my tattoos. I also got the chance to try out a rotary yesterday and I must say I did love it, the color just went in so smoothly, it's gentle on the skin, and boy was the thing damn near silent! Anyways here's a few pictures of the piece I used the rotary on. It is half healed/half fresh. I was very excited to finish this piece I started on my husband almost a year ago, so here it is!

Wipe Case Tutorial

Baby Wipes Case

Alright so I spent the day working on a few DIY reusable wipes cases. They're super easy to make, save space in your bag, still look cute, and get the job done. This is one of my first tutorials so excuse the horrid picture taking skills.

Things you will need:

1. Your choice of material
2. Hot glue and hot glue gun
3. Your choice of a 3/8 inch ribbon
4. A huggies wipes case (I prefer this case because it isn't flimsy)
5. Scissors

Step One: You want to cut out two pieces of material. It does not need to be precise because you will be coming back and trimming excess material off anyway. The easiest way to do it is just set the case on top of the material and roughly cut around it.

Step Two: Make sure your material doesn't have a bunch of creases in it or it will not look as clean. I take the creases out of my with my flat iron. You can use a regular iron as well but I find this easier with such a small piece of material and you don't have to pull out an ironing board.

 

 Step Three: Once you have your two pieces of material cut out it's time to glue them down. You're going to apply the hot glue in the crease of the case where I am pointing to. If you go much lower it will make it difficult to trim the material later. You want to start applying the hot glue on one of the smaller sides first. You will apply the glue and immediately place your material to it. Then you want to go with the side directly across from it and apply the glue again and then stretch the material lightly pulling it nice and tight and place the material down. Then you will proceed to do the same process with the other sides.

 Step Four: Once you have the material placed you will have excess material hanging. You can take your scissors and trim the material off. You want to cut it enough that it does not hang of the edge but don't worry about it looking perfect because its going to be covered with more glue and then your 3/8 inch ribbon anyways.

 Once you trim the material off it will look similar to this. As you can see it isn't perfect but it will be covered with ribbon so no need to be a perfectionist.

 Step Five: Once your material is glued down you are going to take out your ribbon and measure it around your case carefully to get it the exact size you are going to need it. You will cut two pieces of the same size ribbon to use for your trimming. Then you will glue them down. It doesn't matter if you start with top or bottom but you want to start gluing the ribbon down on the back in the middle so when you finish gluing the ribbon it finishes in the back as well and you don't see any seams in the front.

 Once you are finished your case should look something like this. Sorry for my rough tutorial Haha!

Mother by day. Tattooer by night.

Mommy's Little Monsters

So for those of you who don't know. I recently had my second daughter about 2 months ago. That being said I have been tattooing a lot less than usual. I take care of two little girls full time and tattoo during the few spare hours I can squeeze by. My children do not attend any sort of day care, I am a tattooer not a doctor I can't afford that shit, haha. So for those of you whole are loyal clients or new ones waiting for their turn, THANK YOU! It means a lot, and once my youngest gets a bit older I should be able to get back to a regular schedule. Also if you're from Arizona, always keep a look out for my posts on here or facebook reguarding guest spots and trips home. Especially if you have any unfinished pieces. Please lets get those finished before we start a million new ones. 

On that note,

I spent my day with my husband and my girls. I got the girls all dolled up for their first sister photos. Well nice ones, haha.

Here's how they came out!

Our Wedding

So my husband John Spring and I finally tied the knot a few weeks ago on June 30th. Being that we paid for our own wedding and have two little girls we definitely budgeted on a lot of things. So I spent a lot of time on pinterest and crafting for our DIY wedding. I made everything including signs, centerpieces, candles, pomanders, a card box, bride and groom silhouettes, our cake, and the photobooth and ceremony back drops. I purchased just about everything from the dollar store or walmart.

 My Bouquet- Dollar store flowers and coffee filter flowers I made. Total cost approx. $5

Mason Jar Candles- Mason jar 12 pack from walmart, paper doily's, ribbon, and tea lights from the dollar store. Total cost approx. $15

 Votive Candles- 18 votive candles from dollar store and a roll of lace ribbon from walmart. Total cost approx. $20

 Tall Candles- 4 candles, brown paper, paper doily's, and ribbon from dollar store. Total cost approx. $7

 Flower Vases- Vases from thrift store and flowers from dollar store. Total cost approx. $6

 Silhouettes- Wood Plaques from dollar store and acrylic paint from walmart. Total cost approx. $3

 Wedding Favors- Brown lunch bags, paper doily's from the dollar store, mini clothes pins from walmart, and 46 Cuzzi's from oriental trading. Total cost approx. $50

 Ceremony Backdrop- Burlap from walmart, tulle from michaels, pomanders I made with coffee filters, and a personalized chalkboard sign. Total cost approx. $15

 Photobooth Backdrop- Burlap from walmart, chalk board from hobby lobby, tulle from michaels, lights from target, and a coffee filter garland strand I made. Total cost approx. $40

Cake and Drink Stands- Composed from a lot of the things you see above and food made by me and my mother.

Silverware Settings- Realistic looking plastic silverware, paper doily's from the dollar store, twine from walmart. 100 settings. Total cost approx. $30

 Tableware- Plastic table cloth and plastic ceramic look a like plates, clear cups, gold place mats from party city. 100 settings. Total cost approx. $150

 Chalkboard Signs and Cardbox- Pieces of wood, wood box from hobby lobby, chalk from walmart, coffee filter flowers I made. Total cost approx. $13

Personalized Chalkboard Sign- Wood from hobby lobby, chalkboard paint, and chalk from walmart. Total cost approx. $8

 And even though you're always told to never order a dress offline, from another country, or without trying it on first... I did it anyway. I seen a dress on pinterest I thought was perfect but there was no link to the original site, so I thought the dress would never be an option and I would be on the hunt again. Well I was searching through a whole sale site from China (which I know is a no no, but I was on a budget) and 14 pages in there was the dress I had seen. Next I look at the price thinking it would never be in my price range... well it ended up only being $136.00! I couldn't believe it, the dress was mine! BUT, I was 8 months pregnant (I know I picked the best way to go about all of this, haha) so I was guessing on a dress size and hoping for the best when I ordered it. The way I saw it though was if it really didn't end up working out I only lost like a third of the price every other girl wastes on their entire dress. The dress came and it was everything I hoped for but in the pictures you could not see all the ugly little sequences on the top which made it look like a prom dress. Lucky for me though my mother is a great sewer so we went out and bought some lace (which I really wanted on my dress anyway) and she sewed lace over all the problem areas. A month later I had my second daughter and I tried the dress on for the first time 3 weeks before my wedding and it fit!! Everything had just worked in my favor and it was great, I couldn't have been happier. This is how it turned out!

These four were some of the professional photos we had done by Dylan Coffey Photography, a friend of ours. And then I ran them through an app on my phone called PicFX.

 My lovely dress.

 My handsome husband Mr. Spring!

 The Spring family!

 My gorgeous Mother and Daughters!

 These are all a few shots of how our photobooth turned out. I'd say it was truly the best idea of all. It's so much better and more personal than a typical guestbook that everyone just signs. It made for great laughs as you can tell by what some people wrote, haha. And we can look back and see all of our guests and remember how much fun we were all having!

All in all we probably spent a total of $1800 altogether for our wedding. That's including all attire, the venue, decorations, tableware, and food. And in my opinion I thought my wedding looked and turned out great and I didn't have to have a lot of money to pull it all off! Hope you enjoy and maybe even grab a few ideas to make your wedding happen! <3